[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>>I'm thinking if I can find replacements for these hoses (I've called a few places with no luck) and install them, my cooling system will function properly on both sides of the engine, and maybe the flickering oil light will go away. Does this make sense? > Probably. >Does anyone know where I can obtain these hoses, or have suggestions for how I can improvise some? > They are very similar to the pre-heat hose for Bugs and Buses but a tiny bit bigger in diameter. I used a preheat hose when one of mine was bad but I had to slit the end to get it to go over the metal pipe, then I wrapped that end in some duct tape and used a hose clamp to hold it all together. I wasn't really happy with the results but it didn't leak any air and I found a decent original hose later. - Everett ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>