[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Apr 2002, at 22:12, Jim Adney wrote: > There's no way that any bearing saddle should be able to get smaller. They > only get augered out oversize. The crank should turn easily by hand with > nothing attached to it. Check to make sure you have not gotten the one of the > bearing dowels aligned wrong in the case causing it to press in on the > bearing. I left the word dowel out of the paragraph. Make more sense now. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org