[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Apr 2002, at 16:30, John Jaranson wrote: > What are these hinge covers? Do they slip over the aluminum bits on the > leading edge of the pop-out window to make the joint between the window and car > body tighter? If so, I need some. My 66 did not have anything in there. My > windows don't rattle thanks to the new WCM seals, but I don't like to open them > cause they sag a little and the seals get goofed up at the hinge edge. Yes, this is exactly what they are. Originally, all the square and notch popouts had injection molded plastic covers over the hinge tabs you refer to these take up play and avoid rattles. > Do you have any more Jim? Yes, they are makeshift, but apparently they work. You should glue them in place just to keep them on the tabs. The price is $12 per set of 4, including shipping in the US, $10 plus S/H otherwise. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe