Re: [T3] tie rod end

[John Jaranson <jaransonT3@comcast.net>]

Be careful Brian.  The 812C is a RH thread but STRAIGHT tie rod end.  It is
for the right outer.  The 821C is the unique T3 part that is angled for the
left inner.  The angle is only 9 degrees I think and I have successfully
used a straight one on my 66 Square since the early 821b is NLA.


Later,
John Jaranson
'71 FI AT Fasty (Jane)
'66 Square (???)
About Half a Late Square (Organ Donor)
http://mywebpages.comcast.net/jaransonT3/jaransonT3/  (This is my new
website address)


>John Jaranson wrote:
>>>Left Inner Tie Rod End should be:
>
>>>311 415 821C for the 68-73 T3
>
>>>This is an angled RH thread tie rod end.
>
>>>I was able to have my local Autozone order me one.
>
>Correction (called my friendly local import parts store):
>
>311 415 812c
>
>He has two in stock.  WOW!!!!  He was even suprised!
>
>Thanks guys,
>Brian Schlepp
>69 Fasty - "Purple Passion"
>Yakima, Wa, USA
>
>-------------------------------------------------------------------
>Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe
>