[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 12 Apr 2002, at 11:32, Ian Ruinaard wrote: > BTW - How should the kickdown switch be connected (I have taken power from > the coil, through the switch & onto the kickdown connection on the RHS of > the tranny (above the vacuum modulator) This is almost correct. There should be an inline fuse between the coil and the switch, and the kickdown connection is on the LHS, not above the VM. > Is there anywhere on the net I can find a wiring diagram - the one in the > Haynes manual is difficult to read. It sounds like you have the right idea. I don't think a better wiring diagram would help you. I don't know any source that has a really good series of pictures, but some engine photos in the Bentley may happen to show the kickdown switch and some of its wiring. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe