[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Apr 2002, at 8:27, adevars@gmavt.net wrote: > It's been a while since I had to fight a situation like this, but if memory > serves me well, there is a bit of a flat skirt around the case end of the > cylinders. Using a chisle and a rubber mallet, and leaning the chisle as close > to the case as possible so that you will be pushing the cylinder away from the > case more than trying to cut into the cylinder you may be able to walk the > cylinders off the pistons. Be gentle but forceful. I wouldn't use a chisel against the cylinder unless you were planning on replacing them anyway. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe