[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
But I don't know > exactly how to put it all back together. Are there > any instructions on how > to adjust both sides again? I looked in my manual, > but it simply says > reinstall torsion bar. Reinstall spring plate. > Nothing on how to set it up > at a nice stance that won't kill the CV's. Any > ideas anybody? Which manual are you using? I used either the Clymer or Kenneth Ball manual. They both had good desgriptions. Basically, jack the front up and jack stand it. Then jack the rear up and place a level or liquid-filled protractor on the center tunnel and get the car car 100% level. From there you can set the spring plate angle with the protractor to whatever angle is specified for the squareback (19-20 degrees I think, but don't quote me). This may take a few different settings of inner and outer splines to match both sides. If you need to borrow a book, let me know and I'll hook you up. -Phil __________________________________________________ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger. http://im.yahoo.com ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/