[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- Russ Wolfe <russella@prairieinet.net> wrote: > > > > If nobody has noticed, to change a type 1 trans > to a > > > > type 3 you must change the nose cone and the shift > arm > > > > >the type 3 mount will fit on the transmission > > > The difference it the shift arm is that, the set > screw hole is on the bottom > on a T-3, and on the top on a T-1 trans. I have made > them work by redrilling > the set screw hole, but it can be tricky. If you get > it off, then the shift > pattern doesn't work out right. > > -- > Russ Wolfe > '71 Fastback AT > '66 Fastback MT (not running yet) > russw@classicvw.org > http://www.classicvw.org > Could have put all the different things in my statment about the transmissions but was trying to keep it simple, sometimes too much is not good. Phil > ------------------------------------------------------------------- > List info at http://www.vwtype3.org/list or > mailto:help@vwtype3.org > __________________________________________________ Terrorist Attacks on U.S. - How can you help? Donate cash, emergency relief information http://dailynews.yahoo.com/fc/US/Emergency_Information/