[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- Russ Wolfe <russella@prairieinet.net> wrote: > On Saturday 15 September 2001 21:29, Kris Kuckowicz > wrote: > > That's what I thought too. I checked the front > mount today, and it is > > cracked horizontally at the top and bottom. Now > my question is, can I swap > > out this tranny, and put in the extra type 1 > transmission that I have, so > > long as I plug up the rear mounting holes? > > > Check the front transmission housing. If they are > the same, Just swap them > out. I wouldnt even worry about the old mounting > holes. The factory just > plugged them with some aluminum plugs. You could > just find a wooden dowel to > drive in. But if you leave them open, it won't hurt > anything. > > -- > Russ Wolfe > '71 Fastback AT > '66 Fastback MT (not running yet) > russw@classicvw.org > http://www.classicvw.org > If nobody has noticed, to change a type 1 trans to a type 3 you must change the nose cone and the shift arm >the type 3 mount will fit on the transmission ------------------------------------------------------------------- > Too much? Digest! mailto:type3-d-request@vwtype3.org > Subj=subscribe > __________________________________________________ Terrorist Attacks on U.S. - How can you help? Donate cash, emergency relief information http://dailynews.yahoo.com/fc/US/Emergency_Information/