[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Thursday 06 September 2001 17:30, Richardson, Gerald wrote: > There is a pin or shaft that connects to the pedal assy via a clip. This > shaft is what pushes in on the master cylinder. If you look right at the > base of the brake pedal you will see a round clip that is holding this > shaft to it. Hope this helps a little bit. > The brake pedal return spring is also over that pin. After you get the clip off, you will have to get the hook of the return spring off. -- Russ Wolfe russw@classicvw.org http://www.classicvw.org > > From: HBakr@aol.com[SMTP:HBakr@aol.com] > > Sent: Thursday, September 06, 2001 12:56 PM > > To: type3@vwtype3.org > > Subject: [T3] pedal assy removal > > > > Hi all, When removing the pedal assy on a 70 T3, how do I disconnect the > > break master cylinder?? some manuals talk of a "pin" but I can see none! > > I am > > trying to replace a busted clutch cable and I am bogged down already at > > the > > pedals. ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/