[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Heather - West Coast Metric does not list a new Fastback quarter window seal in there catalog, except the Cal-Look one. They are about the only suorce in teh US for new window seals. If your seals are still in good shape and pliable, I would try to save them. I successfully removed the quarter windows on both my Fastback and my Squareback without damaging the seals or breaking the glass. I used a couple of well worn old, flat screw drivers that I had. They did not have any sharp edges on them. A wooden or plastic tongue depressor would probably be a little safer. Just start at one corner and carefully pry the inner lip of hte seal up and and then push it down behind the metal flange on the body. On the Fasty I started at the bottom front corner and worked my way up to and around the top front corner. Then I started back at front bottom corner again and worked my to the back. I was able to pull the window free after going about 3/4 of the along the bottm edge. It helps to push outward on the glass while you are prying. Good luck. If you break or damage anthing let me know. I have the seals and windows from my '71 Fasty that I will not be reusing. DARKSIDE has called the Fasty. Late, John Jaranson '71 FI Auto Fasty (Jane) '66 Square (???) About half a Late Square (Organ Donor) http://hometown.aol.com/jaransonT3 ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org