[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>On Wednesday 24 October 2001 22:20, Jim Adney wrote: > On 24 Oct 2001, at 20:22, Keith Park wrote: > > It should Idle better now, the FI is critical to intake valve > > adjustment... HOWEVER, due to this your intake valves need to be at > > .006, the factory reccomended clearance. > > .004 will be fine for the intakes. The factory recommendation was > .004/.004 until they started having too many exhaust valve > problems and warrantee claims. They switched their > recommendation to .006/.006, but there was never any problem > with the intakes, so I have been doing mine at .004/.006 for 25 > years. > > What do you do, Russ? > I use a .004-.006 go/no-go feeler gage. I set the exhausts so the .006 just goes in, and I set the intakes to a loose .004. -- Russ Wolfe '71 Fastback AT '66 Fastback MT (IT RUNS) russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe </x-charset>