[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Oct 2001, at 10:40, Erick Williams wrote: > Yes I did. In fact I followed the instructions of everyone on this forum. I > swapped everything that is needed. I do have one question though. I replaced > the oil cooler (of course) and it seals. As the same with the mounting > hardware. What I can't get is why is there a huge amount of oil coming out of > that area? Have any thoughts? I would apprieciate it. Glad to hear you did your homework, but it sounds like you didn't get the seals right. There are 2 different coolers and 2 different case geometries, and 3 different seals, from which you have to choose the right one depending on which case/cooler combination you have. Have you read the FAQ on this? If not, email me for a copy. There is a tremendous amount of confusion about this, and there is no other source for information on this which is completely accurage. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/