Re: [T3] trigger points measuring

[phil cain <bearsvw2000@yahoo.com>]

--- Kris Taylor <importautoclinic@yahoo.com> wrote:
> Ok, the car was not charging, replaced the
> regulator,
> charges ok now, distributor is out, i want to know
> if
> anyone knows what the minimum measurement of the
> tabs
> should be that rub on the distributor lobes for the
> trigger points. I dint want to put 50 bucks into it
> if
> its not going to fix my running problem, thans in
> advance,Kris Taylor, 72 FI auto fasty (slowy)
> 
> __________________________________________________
> Do You Yahoo!?
> Listen to your Yahoo! Mail messages from any phone.
> http://phone.yahoo.com
> I think Jim covered this a while back, take them out
(trigger points) clean them off with carb cleaner ,
let dry, pull dry paper between the contacts , put
some white grease on the lobes and reinstall points.
the points when installed should be set to .016 but
you have no way to check or set them. I cut a old but
good dist down to where I could adjust mine while
installed. Phil
>
-------------------------------------------------------------------
> Too much? Digest! mailto:type3-d-request@vwtype3.org
> Subj=subscribe
> 


__________________________________________________
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.
http://phone.yahoo.com