[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
on 11/6/01 9:47 AM, Jim Adney at jadney@vwtype3.org wrote: > I don't remember the exact "correct" values for these, but I think it should > be > more like 200-300 Ohms. Let's both double-check our memories tonight. If it > is supposed to be 200-300 but reads 2-3 then it is shorted and you need a > new one, as you first suspected. The temp sensor 2 is supposed to be 300 ohms. Bentley sas it will read 3.0 on the meter. Higher temp. makes reading lower. Temp sensor 1 is supposed to be about 2500 ohms. (between 2 - 3000) -- Mike Wodkowski 72 FI SQBK Brooklyn wodkowski@mac.com ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe