RE:[T3]66 square update

["Jim Adney" <jadney@vwtype3.org>]

On 15 May 2001, at 1:23, BOB2TYPE3S@aol.com wrote:

> an impact wrench takes them right off... and wont rotate the flywheel.  but
> DONT use it to torque it back on!
> 
> Keith

> What if you have an automatic? You can't use a KYMCO tool on them, as theres 
> no teeth for the tool to work.

Use the same angle iron I suggested for the flywheel and drill 
another hole in it to bolt to the drive plate. It's the same idea, but it 
does take a bit of fiddling to get the bolts in there.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/