[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 6 May 2001, at 21:38, Jedediah Millheiser wrote: > i would assume the shifter bushing is the one i need > to replace? the current problem is that the shifter > is EXTREMELY sloppy. its almost impossible to find > first gear. from what ive been told a worn shifter > bushing usually causes this It really could be either the coupling or the bushing. I would start by checking the coupling because you can get to it and just check it. It is held on with a pair of set screws with 8mm SQUARE heads. A 5/16" 8 point socket fits these perfectly. Make sure they are tight. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe