[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] problem with gas mixing with oil !!!
There have been recient posts about this same
subject. One guy found injectors 1 and 4
always injecting non stop. He believes he found
a faulty brain. The outcome still pending.
Follow Jim's suggestions first.
then see the following:
- fuel pressure (way too high ?) must be around
28- 30 lbs. If not readjust it.
- Pressure sensor disconnected or not holding
vacume ? Check these, follow bently manual.
- injectors leaking ? Check these by taking a
pair out, place in jar and see if one is stuck
open. Disconnect coil and turn ignition on.
If you have the throttle "pump" option working,
pump the throttle to see how the spray pattern looks
while you are there. If not, then you can take the
distributor out and turn it manually while the key is
switched, you can see the pattern this way. Remember
to disconnect the coil from the battery voltage and insulate
the voltage wire, you do not want to start an engine fire.
The object of this last check is to see if the injectors are
squirting way too much fuel . You can tell if it sends it in
gobs instead of conical sprays going on and off.
LEON MARTINEZ
1969 SQUAREBACK EFI/AUTO
SAN DIEGO AND TIJUANA
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org