[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>How do i adjust the idle speed(dual solex 32PDSIT's)? in the manuals, it doesnt show where the idle adjustment screw is, and it uses different names for things, and confuses me. My idle is WAY to high, after i did the rebuild...<< The idle adjustment screws are located under the chokes and are best adjusted with a short flat blade screwdriver. Not to be confused with the volume control screws, which are on the side of each carb and have large black plastic or knurled brass heads. There are a lot of things that can cause a high idle, including misadjusted throttle linkage (especially if the main right or left link is too long), misadjusted choke linkage, bad throttle cable adjustment, binding at the pedal, sitcky linkage connections, etc. >>but, my carbs are missing come things, << Might be the problem... Scott 62 343, 65 361 ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/