[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hello listees, I have an emissions problem. The emissions for my '68 is at 10% CO which is far above the allowed limit in Colorado. My mechanic told me he has thoroughly tested components (temp sensor, pressure sensor, computer) with his volt\ohm meter. He even put new plugs in. The fuel pressure was up to 50 lbs and he brought it down to 26 lbs which is slightly under the specs. The problem still exists. A slight adjustment in the fuel mixture (toward lean) results in the engine dying. Can anyone offer some advice as to fixing this problem? We are at our wit's end over this. He was suggesting perhaps the previous owners put the wrong injectors in. He was asking if I knew the Millisecond ontime of the injectors. I told him I would try to get that info from the list (and any advice offered). Thanks, Field Marshall Schiller E-mail mlschill@mail.uccs.edu "Vinny" - 68 Type3 Fastback "Wally" - 78 Type2 Transporter ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe