[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: Re: [T3] oil leak? > On 6 Mar 2001, at 10:01, Oscar wrote: > > > Check your crank for excessive end play to make sure that it's not a > major engine problem. Then see if you can reach and tighten the oil > pump cover nuts. Are they still all there? > > BE VERY CAREFUL! Your engine should have small (6mm) studs here, the > nuts have 10mm hexes. Don't overtighten or you will break them off > and you REALLY don't want that to happen. > > - Mac Tools made a special wrench for the 6mm oil pump nuts on a type 3. I have one in the garage someplace. Long handle, with just the right offset. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe