[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 1 Mar 2001, at 20:23, Joe Plowick III wrote: > I have two questions for everyone. > > 1. I have a spare swingaxle rearend that I need to remove the axles from. > The person that I purchased it from literaly cut it of the car (don't there > wasn't much left of the car), right through the spring plates. So I have a > trans with the axles and brakes still attached. What can I do to get the > rear axles nuts off? I tried a impact wrench but no luck, and I don't have > anything to leverage it against like when it is in a car. I thought about > trying to cut them off. Would this work? You could try drilling 2 holes in a long steel bar so you could bolt it to the brake drum with 2 lug bolts, then get a big wrench and socket to torque off the nut. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe