Re: [T3] Collecting stamps

["Jim Adney" <jadney@vwtype3.org>]

On 29 Jun 2001, at 8:08, Jim Adney wrote:

> On 29 Jun 2001, at 11:40, Henrik Larsson wrote:
> 
> > I'm not sure that I would manage to fit the Heli-coils myself. Wouldn't I need a drill
> > press to drill the hole?
> 
> You really don't need to remove much metal, so that is not a 
> problem. The recommended drill size (which should come with the 
> kit) is 10.25mm, which might take a somewhat larger drill chuck to 
> accomodate.

On thinking about this a bit, I think there is a good chance that you 
would not need to drill these holes out at all; they may already be 
nearly 10.25mm dia. In that case you just need a friend to help you 
watch the Heli-coil tap to make sure you keep it parallel to the axle 
stub.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/