[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You might find the 10x1.0 helicoil and tap at you local bike shop. This is a
common repair required where the rear deraileur attaches to the frame. Bring in the
knuckles and they could do it for you! Also, I've seen recently a special "nut"
being used on aluminum frames. The former 10x1.0 hole is drilled oversize, and a
flanged nut with 10x1.0 internal threads inserted from the rear. The flange has a 1
mm hex head to apply some torque.
Peter Parker
'66 Square; Phillip
Portland, OR
-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe