[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Subject: [T3] Long question about a short > > > I just replaced the rubber seals behind the front and rear > turn signals in > my 68 Squareback. Now the right turn signals, both front and > rear, work > fine but the left ones appear to be possessed. When the left > signals blink, > both front turn signal lights flash with the right one > blinking very weakly. > The rear lights are worse. Again with the left turn signal > on the correct > upper left bulb blinks but so does the left and right middle > tail light > bulbs although weakly. There was some rust behind the front > left seal > which I cleaned up and repainted. It appears I have a > grounding problem and > my question is "Are the two screws used to attach the chrome > front turn > signal housing to the fender part of the grounding connection?" I'm > wondering if the cleanup job is preventing these screws from > making good > metal to metal contact. > > It sounds like a ground problem. Since you had the front TS's off, you may had disturb, or mis-wired a ground. Russ Wolfe russ_wolfe@MAHLEParr.com Mahle Parr Filter Systems 505 E. Madison Winterset, IA 50273 ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe