[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 21 Jun 2001, at 1:35, Mike Wodkowski wrote: > Well, spent a couple days working on the headlight and turn signal > wiring. Hoo boy, my case for the Driver side headlight is a mess. In > fact I think my fender was re-shapen at some point. The casing for the > headlight on the left is different than on the right. Or are Bug > headlights larger than T3s. If by "casing" you mean the part that bolts in that then holds the headlight, then I think that part is the same as a beetle. They use the same headlights. > But here's the question. The wiring guide in the Bentley for 72's > shows the gray + wire running 1st to the side marker, then to the > larger bulb. No black - wire to the side marker. The black - wire runs > only to the large bulb. Now, this did not work on my setup since my > side markers had mini terminals that required both gray and black > wires be run to both the front and side marker socket terminals (the > wires had to be pigtailed). At lease this is what it took for my side > markers to operate properly. So what gives with the wiring diagram, or > what did I do wrong? Only the main bulb is supposed to flash with the TS. You should only need 1 wire to the side marker bulb. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe