[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 14 Jun 2001, at 21:19, jesse and monica wrote: > Could anyone tell me an easy way to remove the crankcase breather? Just > the part that the little filter sits in. i need to replace the rubber > hose that connects to the oil filler tube to the breather and it is > proving very difficult to do without removing the breather. > I think there is a tool to remove the gland nut but is there a way to > improvise without the tool? If yours is still tight, leave it that way and remove the box and stand together. It's easy: 4 nuts on case studs and 1 long bolt thru the fan housing and "handle" in the rear. > Also, i am looking for all of the components for the thermostat that > controls the cooling flaps for my 71 squareback. does anyone have a > complete setup for sale? for the po removed all traces of this setup > and now that i am driving the car i want to get it back on there. I believe I've sold my last easy to reach set. They're going to be hard to find. The bell crank w/lower push rod is the tough part; I have lots of fan housings with flaps and upper push rod. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/