[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: Re: [T3] Those with Gene Berg full-flow kit - Question > > Subject: Re: [T3] Those with Gene Berg full-flow kit - Question > > > > On 10 Jun 2001, at 17:01, Joe Plowick III wrote: > > > > > > > > IIRC the hose that comes out of the pump goes to the port that > > feeds the center of the filter. Often there is a cast in marking on the > > filter base saying "IN" at the right location. I have always found this > > confusing, too, since it's not clear which way the filter expects the > > oil to flow thru it, and, yes, it matters. > > Filters are designed to filter from the outside in. This gives more surface area. Imagine a roll of toilet paper. More area on the outside. > > > And where would this go? This has the larger thread same as the hose > ends. > > > http://www.ij.net/type3lvr/extra_piece.jpg > > That is a 90 degree JIC swivel. It does not have NPT threads, so it wouldnt screw into a standard street elbow.It might be for the ends of one of your flex lines. > > Looks to me like a fitting just in case you need to add another right > > angle bend at the end of one of your hoses. > > > > I see you got the pressure relief pump cover, too. That's a nice > > touch, especially for colder climates. > > Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/