[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2 Jun 2001 17:20:34 -0500, Russ Wolfe wrote: > >> >> On mine, there is nothing where the numbers should be. Does that mean >> that it is an aftermarket case or one scrounged from another type of >> VW? >> >It just means that the case HAS been replaced. See if you have dual oil >pressure relief valves in the case. Anything after 1970 should have the dual >relief valves. If you do, then you are basically OK. The case does not make >any difference as to the fuel injection. If you have the 5 wire throttle >switch, then you need the "E" control unit, and the matching pressure >sensor. If you have the 4 wire throttle switch, you need the "C" or "D" >control unit and its matching pressure sensor. "D" was just a minor >improvement over the "C". They fixed a bug in the "C". Does the sensor Part # for the sensor matching the "E" control unit end with an "E" as well? Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe