[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
My thoughts exactly!! jesse 71 fi squareback DY wrote: I found the exact same thing last month when I removed my right rear fender so the guy doing my floorboard could also access the wheel well (the damaged section here was much larger than yours so it necessitated a sheet metal patch). Because the sealer was cracked and falling off all the way around (to be specific, I'm talking about the body filler stuff used to seal the panel directly in front of the rear wheels) what I ended up doing was knocking off all the loose pieces and then filling the gap with a bunch o por15. My main concern was to halt the light surface rust that was appearing around the seams. I don't know how effective this approach will be in the long run but it seemed a better option than doing nothing! Especially since there are no cosmetic issues involved. Thoughts/experiences/tactics anyone else? DY 68sq ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/