[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Quick question.....I'm in the process of removing my engine, and i was removing the drive axle. I removed the big lug nut by the brake drum on the passenger side just fine, but the oneon the driver side would not move. I use a breaker bar, liquid wrench, and I jumped up and down on it, and it still did not come loose. Any ideas? Torch maybe? Thanks in advance for you help.Robert. Well, I've had to cut them off occasionally. usually you don't have to cut into the threads, you just need a groove most of the way down to the threads on two or more sides to relieve pressure (better with three). Then you can sometimes turn it off. By the way, liquid wrench, wd-40 and all of those popular ones are nothing but water when compared to ond called "Break Free". It also goes under the name "CLP" it can often be found at gun shops and the like. This stuff is amazing. You will never go back once you've used it. Kelly ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/