[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Jul 2001, at 15:14, jesse and monica wrote: > Does anyone have the plugs and a little lead of the wire that plugs in > the fuel injectors that they would sell? You can use the connectors you already have and any good quality stranded hookup wire. Be sure to insulate the connections you make well. > Finally, how can i tighten up the injector plugs on the other side? I > cant seem to get the little push on plugs out of the plastic holder so i > can squeeze them a little so they are a little more snug on the > injector. Any tips out there? You have to make yourself a tool to release the locking tab in the connector body. Look in the face of the connector and you will see a small rectangular extra space that doesn't seem to be necessary. The tool goes in there and depresses the tab so that you can pull the connector back out of the body. Work slowly and carefully or you will do more harm than good. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/