[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: [T3] wiring harness ends? > Hey all, > Does anyone have the plugs and a little lead of the wire that plugs in > the fuel injectors that they would sell? The PO of my car for some > reason cut the wiring on the drivers side for the fuel injectors and > used radio wire type clamp connectors to patch them up. I tried > soldering the wires back together but the wires are so brittle that when > i was bending them around the insulation on the wires kept cracking. I > did my best and soldered them back together but i keep having problems > with the number four cylinder not firing. The plug for the number three > cylinder seems ok. I pulled the plug on the number 3 cylinder and hooked > it up to the number four and it increased the idle so i know that it's > the wiring because all other cylinders except number four is doing there > thing. I also checked the wiring with an ohm meter and the number three > cylinder was like 15 ohms and the number four was not a complete > circuit. Also if someone does have the wire ends it would be great if > they have the little dust boots also for mine are split. > Finally, how can i tighten up the injector plugs on the other side? I > cant seem to get the little push on plugs out of the plastic holder so i > can squeeze them a little so they are a little more snug on the > injector. Any tips out there? I think someone said you can still buy the connectors from VW dealers, but not the boots. The also said you can get the boots at a Volvo or Mercedes dealer. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/