[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: [T3] Quick question on rear turn signals, 69 SQBK > Hi all, > > My emergency flashers and turn signals aren't working so I thought I should check out the > light bulbs first. Basically, when I flip the turn signal lever the dash indicator just > light solid (no blinking) and no lights (front or back) light up. Not that is means a > thing, but the relay looks relatively new. > > I can get to the front turn signals - I see the screws, but the rear turn signals don't > have any apparent screws to get at the bulb. How can I remove the housing back there to > check out the bulbs? > > Thanks, I know it's probably a basic question but I'm not sure how to do it. And I'll > feel more confident and safer on the streets with turn signals. I don't think most > people recognize arm signals, they probably just think I'm crazy throwing my arms out of > the window... > There should be 2 screws (one at the bottom, and one about in the middle) in each rear turnsignal lens. With these screws out, the lens should come right off. The T/S bulb, is the upper bulb, or should be. Check the fuses, and the Emergency flasher switch. all the T/S's go through the e-flasher switch. If it gets corroded, (as mine was), none of the turn signals will work. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe