[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Jul 2001, at 0:16, Damian Moscatt wrote: > I also found an email suggesting that my valve clearances be .004" for > intake and .006" for exhaust.. Is this right or what is going to give > me best performance. The number you need depends on your head, while the numbers above are for dual port heads. I think there were several versions of the single port heads, so this is going to be hard to answer. BTW, the breathing of the single port heads is pretty poor. There may be little point in adding the special cam and exhaust to this engine. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe