[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] getting it to start


okay folks here is the update on my rebuild and restore of my 1971 squareback.
it is a 1600DP  with dual 42 DCNFs (berg specials) and 1 3/8 exhaust 
(j-tubes).  the entire ignition system is new minus the switch at the 
steering column which works fine.  coil is new and new 009 dist.  now upon 
trying to start i mismatched the fuel lines so i was getting no gas to carbs, 
but solved that problem. (i accidentally caught the carbs on fire while 
priming them with some gas).  so all filters are full and carbs are getting 
fuel but not running  what the?  so then i check for spark (i accidentally 
shocked the be-jesus out of my hand but i am getting spar, however i need to 
check all other plugs to make sure.).   so spark and gas but no fire means to 
me timing.  now a friend said remove valve covers and remove dist cover and 
put #1 at TDC and make sure it is lining up.  i will do this but i have 
another question the car backfired a few times (the ringing in my ears 
finally stopped a few hours later after having people at work repeat 
everything into my GOOD ear) does that mean combustion or no?
any input?  i am thinking the dist gear might be in wrong BUT i checked and 
double checked when i installed so i KNOW that cant be the case.  HELP ME 
PLEASE

caesar

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]