[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Subject: [T3] From seat guide rails to Carpet Nails.... > > > Dear Volks- > > With everybody's help I am getting closer to installing my > spiffy new TMI > carpet kit and am wondering whether or not to use carpet nails in the > process. After just finishing dealing with rust hell I am not > interested in > doing anything that would generate any future rust spots, as it seems > carpet nails might promote. However, I want the carpet to fit > nice and > tight/flat, and don't think adhesive alone can do the job. > Furthermore, I > would like to use as little adhesive as possible. SO, do I go > ahead and use > the carpet nails? If so, does anyone know if holes need to be > pre-drilled? > As always any advise would be greatly appreciated! > If you do use the drive nails, be careful. do not drive them through into something critical like a wire harness. I have seen it happen a couple times after someone has done bodywork. Russ Wolfe russ_wolfe@MAHLEParr.com Mahle Parr Filter Systems 505 E. Madison Winterset, IA 50273 ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe