[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Hello, here's a quick question I hope somebody can help me with. > I have two axle beams from two different cars of unknown years. I will > be using parts from both for my Notch. I have noticed that the shank > diameters of the tie rod ends are different between the two. No biggie, I > figured one is earlier and one is later. > The confusion starts here : The spindles, brake rotors and calipers are > the same between the two. How can I easily tell if these axle beams are > equipped with the earlier or later disc brakes? > > Mike T. > The one with the small tie rod ends is early: 67 thru 68-1/2. Spindles should be identical with the exception of the area where the inner wheel bearings and seals sit. (smaller on the early.) Everything else should be the same except for the inner wheel bearings and seals, of course! Bob Myers ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe