[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Has anyone ever seen it where all the bolts for the rear half of the fan shroud do not line up? I finally got my issue with the full flow kit resolved, and I noticed that when I mount the shroud with the two lower bolts (on either side of crank) that the top ones don't line up. And they are off by a good distance. I'm using a new universal case, but I've never had this issue in the past with other motors. It's as if the oil breather to mounted to high, but it only has the normal gaskets between it and the case. I was going to elongate the holes to get the bolts to fit, but I wanted to get other suggestions before I do that. Hopefully you can see what I mean in this pic: http://www.ij.net/type3lvr/fan_shroud.jpg Thanks, Joe Plowick My Site: http://type3lvr.homestead.com ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org