[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> You're just trying to rotate the drive shaft into the correct orientation, > right? Maybe all you need to do is get the drive shaft up as high as you > are able with whatever tools you are using, rotate it to the proper > orientation, and plop it back down to engage the crankshaft gear. I just started reading this thread and I thought I'd point out that the drive on the dist will only go into the drive on the motor one way. It is off set to one side. The only way to turn the dist. 180 degrees is by pulling the dist. completely out, driving the pin out of the shaft and turning the "gear" I've been down this road *many* times, Greg -- Vintage Warehouse PO Box 2321 Windsor, Ca. 95492 USA 707.291.7606 http://vintagewarehouse.com ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org