[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You're just trying to rotate the drive shaft into the correct orientation, right? Maybe all you need to do is get the drive shaft up as high as you are able with whatever tools you are using, rotate it to the proper orientation, and plop it back down to engage the crankshaft gear. Before you do this, you will need to make sure the engine is turned to be in the cyl #1 firing position. Good luck! -Mark Fuhriman '69 Fastback ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe