[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 18 Jan 2001, at 12:37, Mark Fuhriman wrote: > Durng my wiring troubleshooting I had Fig 10.1 from the Bentley Fuel > System section (p. 17) open in front of me. This is the FI wiring > diagram for '68 and '69 cars. My car is an early '69 (9/68 I think). > The diagram shows the multi-pin connector for the ECU with slot #14 > empty. I had never noticed this before. I checked several references AND looked at a number of FI harnesses I have and this is what I find: It appears that #14 IS supposed to be there for 68-9 for all those cars which do NOT have the extra cold start valve installed. There is no wire #2 or #25 in any of my harnesses. I think your harness is fine. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org