[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> use a 60 ohm resistor to ground... roughly 60 ohms is what > the brain sees > when the engine is hot from the sensor. OK, I can understand this. But say I don't happen to have the 60-ohm resistor in my toolbox tonight... If I get the car to stall, can't I just measure the resistance of the sensor? I understand I'd need to take care not to disturb the position of the wire going into the sensor. If I measure a zillion ohms, my sensor is bad, right? Thanks! -Mark Fuhriman ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe