[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 20 Feb 2001, at 18:48, neil verdon wrote: > well if you undo the bolts that hold the heat exchangers on and the > bottom tinware bolts you may find a little more movement available > when fitting i like to get it all lose assembled first and then > tighten it all up when its all together there will be a certain amount > of streatch available and it will all bolt together. I believe he quoted a ~2" difference in the center-to-center distances. This is too much to make up with bolt slop and probably too much to be manufacturing tolerances. I think they just shipped him a beetle exhaust. The lower heat exchangers on a beetle are much closer together than on a type 3. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org