[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Yep, both of my license plate brackets (and 6mm mounting holes) are on each apron under the hatches. The brackets (which resembles a '-') are centered roughly vertically on each apron, so I either had to make two brackets per plate, one to go between the right side holes on the plate, and one for the left side holes (so the bracket would resemble an 'H'), or just drill holes into my license plate to fit them on the original bracket. I chose the latter, and I got lucky, as the holes I needed to drill missed all of the letters on my plates. I think it looks pretty good, too. The bracket is totally hidden behind the plate. Good Luck, Freddie Lochner http://devoted.to/my69notch > -----Original Message----- > From: Jim Adney [mailto:jadney@vwtype3.org] > Sent: Saturday, February 17, 2001 6:44 pm > To: type3@vwtype3.org > Subject: Re: liscense plate bracket > > > On 17 Feb 2001, at 15:16, Tom Hansen wrote: > > > Ever have a Notch, Jim???????? > > Guess what, same front and rear. > > Tom sent me a nice picture of his notch with the rear bracket BELOW > the rear hatch. This came as a complete surprise to me. My question > for Russ is: Were the holes for the rear brackets already drilled > when the cars were delivered to the dealers? > > I'm just wondering if they tended to get mounted in different places > depending on local custom. > > Do the other notches out there have threaded 6mm holes BELOW the rear > hatch? > > - > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org