[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
All, Thanks all for all of the great advice! The clutch is no longer stuck(adjusted it and used Jims advice with the jackstands), and fixed the fuel pressure problem (blew out the return line). But its not over yet.... When I let off the clutch to get into gear, the car wants to stall. Could a bad pressure sensor cause this? The reason I am asking is that the PO destroyed the adjustment screw and it looks like it has been completely removed. It also runs a hundred times better with the vacuum line at the auxillary air regulator un hooked. I double checked my points,timing etc. What else should I check? Here are the stats: Fuel Pressure is 31 psi (its a '73) head temp sensor reads 2.8 ohms voltage is 14+ Thanks Again, Robb ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org