[T3] adding an oil filter

[Cool43whip@aol.com]

Hey everybody.
    Tonight I am adding an oil filter to my t3 and I am getting ready to 
drill a hole for the return feed into my case.  I am using an oil pump cover 
with a nipple for the supply to my remote filter and I wanted to ask the list 
for a good location for the return.  Any advice would be greatly helpful.  I 
don't want to screw up this case because it took me a long time to find a 
good used case that wasn't worn out.
Thanks  alot.
p.s. --Special thanks to Jim Adney for helping me with a carburator question 
a few months ago,  It was a vaccuum leak on the left bank and I never 
properly thanked him.  Every day I read over the list and I look at all the 
different questions people have.  Jim usually takes the time to help most 
people with their difficult problems  by voicing his special brand of t3 
knowledge.  I consider myself very lucky to have found this list and feel 
especially lucky to have found someone with the expertise he holds.  So I'm 
sure I speak for many t3 listees out there when I say thank you Jim Adney and 
happy holidays!
Sincerely,
Cool43whip@aol.com
aka Chris Causey

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org