[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Returned to the list: On 5 Dec 2001, at 9:35, Joe McGill wrote: > >I think a place called Innovations in Fiberglass makes floor parts for the type > >3s, but they are not as good as you'd like and most people are dissapointed in > >the result. They are also not as good in a crash as the metal pans because the > >parts weren't designed to be made of this material. > > Well, then, do you think a good repair shop (there's a very good one near me in > Manassas, VA) could patch the pans with metal? Basically, that would require > quite a bit of welding and cutting, I'd say. Yes, and it could get expensive quickly if you're paying someone else to do it. > >If you ignore the holes in them, then all 61-69 front fenders interchange, and > >all 70-73 front fenders interchange. In general, they are very hard to find in > >good condition. > Then, I guess I could put some holes in the fender I have to make it able to > have molding put on it. The issue I have is that one of the front fenders on > the Notch I'm wanting to buy is from an "N" model, but the car is an "S" > model....thus this one fender has no holes for molding or the "side marker"..... Unless you need a gas filler hole, this is no problem. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe