[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 5 Dec 2001, at 9:08, James Constable wrote: > I have tried both methods. > > I have the Marshell on a t-piece, ensured that I had it pumping through to a > jerrycan, then while flowing, blocked the outlet of the hose. In that case, either the gauge or the pump is bad. You've done everything right. Since I think you commented that the "thumb on the hose" method revealed that there was easily enought pressure to spray gas, then this sounds to me like the pump is fine and the gauge is bad. This should show up readily on a 0-15 psi gauge. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/