[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 2 Dec 2001, at 15:34, Steve Friedeck wrote: > The long block I've purchased for my 66 fastback didnt have the > bracket attached to the head. Is it O.K. to loosen up the one head to > install this or should both heads be loosened and torqued again? It's okay to just loosen the 2 nuts that you need to, and then retorque them properly when you're done. Remember that the torque for 8mm studs is NOT the same as that for the original 10mm studs. The type 3 manuals will only show the correct torque for the 10mm studs. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org